Hobart Handler® 210MVP

MIG Welder 115V or 230V

219.14.500553

$1,295.00

FREE STORE PICKUP
IN STOCK

Handler® 210MVP MIG Welder

 

A versatile wire feed welder capable of operating on either 115V or 230V input power. Welds up to 3/8 in. mild steel, spool gun ready for aluminum and is flux-cored or MIG ready.​

 

 

Features

 

  • Max 210 amps in small portable case - Sized for you to easily transport the unit to the jobsite with the power to weld 3/8 in. mild steel.
    • Allows you to fine control the output parameters for improved arc performance with less spatter for a better bead appearance and less clean up.
    • 7 (230 V) and 4 (115V) voltage settings, with infinite wire feed speed control

 

  • Accepts uncomplicated, simple-to-install direct plug-in SpoolRunner 100 spool gun - Allows you to weld aluminum with enhanced feed ability and reduction of “bird-nesting.

 

  • Integrated spool gun control circuitry is standard - Eliminates your need for an additional control box or adaptor to connect the SpoolRunner 100 spool gun.

    • Allows you to connect to common 115 or 230 V power receptacles without the use of any tools - simply choose the plug that fits the receptacle.
    • Dual-voltage capability with MVP (multi-voltage plug)

    • You are able to quickly reference initial settings for different wires, gases, materials, and thicknesses. Provides you a quick starting point whether you are a novice or professional.
    • Door Chart with initial settings

 

  • Built-in contactor - Keeps wire electrically “cold” until trigger is pulled which gives you ease of use and keeps you safe.

 

  • Industrial cast aluminum wire drive system - Durable wire feed provides you professional performance

 

  • Convenient polarity changeover - Easier and quicker for you to change polarity between solid or tubular wire.
    • Less of your time consumed in setup by offering three grooves – two for different size solid wire and a third for flux-cored wire.
    • Quick Select drive roll

  • Short circuit protection - Protects unit against current overload.

 

  • Self- resetting thermal overload protection - Protects power transformer from thermal overload to provide you maximum reliability.

 

  • Current-limited motor protection - Protects wire feed system from overload, you won’t need to change or reset the circuit breaker button.

 

PROCESSES

  • Flux Cored (FCAW)
  • MIG (GMAW)

 

INCLUDED

 

  • Comfortable 10 ft. (3m) HR-100 gun
  • Owner's manual with installation, operation and maintenance guidelines.
  • 10 ft.(3m) work cable with clamp
  • Built-in gas solenoid value and dual-gauge regulator with gas hose
  • Spool hub assembly accommodates 4 or 8 in. spools
  • Sample spool of .030 in. self-shielding flux-cored wire
  • .030 (0.8mm) contact tips
  • Quick Select™ drive roll for .024 in. (0.6 mm) or .030/.035 in.
  • Power cord with 5-15 P (115 V, 15 A) and 6-50 P (230 V, 50 A) MVP (TM) plugs
  • Welding guide and material thickness gauge
Item MIG Welder
Series Handler® 210MVP
Industries InterestsRacing / Custumizing / Restoring / Diy / Home Hobbyist / Farm and Ranch / Metal Art / Sculpture / Manufacturing
Material ThicknessMild Steel 1/4 in - 3/8 in
Weldable MetalsAluminum / Stainless Steel / Steel
Imput Voltage110/115/120 V
220/230/240 V
Imput Phase1 - Phase
Input Hz60 Hz
Current TypeDC
Rated Output115 V, 90 Amps @ 20%,230V, 150 Amps @ 30%
Max Open Circut Voltage 34 VDC
Wire Feed Speed
IPM Range 40 IPM - 770 IPM
PortabilityHandle(s)
Weld OutputCV
Net Width
10.625 in
Net Length19.5 in
Net Height12.375 in
Net Weight79 lb
Application Mantenance, Construction, Auto Body, Farm/Ranch, Boat/Marine, Home 
Color White
Features Dual-Voltage Input with the MVP Plug

Handler® 210MVP MIG Welder

 

A versatile wire feed welder capable of operating on either 115V or 230V input power. Welds up to 3/8 in. mild steel, spool gun ready for aluminum and is flux-cored or MIG ready.​

 

 

Features

 

  • Max 210 amps in small portable case - Sized for you to easily transport the unit to the jobsite with the power to weld 3/8 in. mild steel.
    • Allows you to fine control the output parameters for improved arc performance with less spatter for a better bead appearance and less clean up.
    • 7 (230 V) and 4 (115V) voltage settings, with infinite wire feed speed control

 

  • Accepts uncomplicated, simple-to-install direct plug-in SpoolRunner 100 spool gun - Allows you to weld aluminum with enhanced feed ability and reduction of “bird-nesting.

 

  • Integrated spool gun control circuitry is standard - Eliminates your need for an additional control box or adaptor to connect the SpoolRunner 100 spool gun.

    • Allows you to connect to common 115 or 230 V power receptacles without the use of any tools - simply choose the plug that fits the receptacle.
    • Dual-voltage capability with MVP (multi-voltage plug)

    • You are able to quickly reference initial settings for different wires, gases, materials, and thicknesses. Provides you a quick starting point whether you are a novice or professional.
    • Door Chart with initial settings

 

  • Built-in contactor - Keeps wire electrically “cold” until trigger is pulled which gives you ease of use and keeps you safe.

 

  • Industrial cast aluminum wire drive system - Durable wire feed provides you professional performance

 

  • Convenient polarity changeover - Easier and quicker for you to change polarity between solid or tubular wire.
    • Less of your time consumed in setup by offering three grooves – two for different size solid wire and a third for flux-cored wire.
    • Quick Select drive roll

  • Short circuit protection - Protects unit against current overload.

 

  • Self- resetting thermal overload protection - Protects power transformer from thermal overload to provide you maximum reliability.

 

  • Current-limited motor protection - Protects wire feed system from overload, you won’t need to change or reset the circuit breaker button.

 

PROCESSES

  • Flux Cored (FCAW)
  • MIG (GMAW)

 

INCLUDED

 

  • Comfortable 10 ft. (3m) HR-100 gun
  • Owner's manual with installation, operation and maintenance guidelines.
  • 10 ft.(3m) work cable with clamp
  • Built-in gas solenoid value and dual-gauge regulator with gas hose
  • Spool hub assembly accommodates 4 or 8 in. spools
  • Sample spool of .030 in. self-shielding flux-cored wire
  • .030 (0.8mm) contact tips
  • Quick Select™ drive roll for .024 in. (0.6 mm) or .030/.035 in.
  • Power cord with 5-15 P (115 V, 15 A) and 6-50 P (230 V, 50 A) MVP (TM) plugs
  • Welding guide and material thickness gauge

Item MIG Welder
Series Handler® 210MVP
Industries InterestsRacing / Custumizing / Restoring / Diy / Home Hobbyist / Farm and Ranch / Metal Art / Sculpture / Manufacturing
Material ThicknessMild Steel 1/4 in - 3/8 in
Weldable MetalsAluminum / Stainless Steel / Steel
Imput Voltage110/115/120 V
220/230/240 V
Imput Phase1 - Phase
Input Hz60 Hz
Current TypeDC
Rated Output115 V, 90 Amps @ 20%,230V, 150 Amps @ 30%
Max Open Circut Voltage 34 VDC
Wire Feed Speed
IPM Range 40 IPM - 770 IPM
PortabilityHandle(s)
Weld OutputCV
Net Width
10.625 in
Net Length19.5 in
Net Height12.375 in
Net Weight79 lb
Application Mantenance, Construction, Auto Body, Farm/Ranch, Boat/Marine, Home 
Color White
Features Dual-Voltage Input with the MVP Plug

BETTER TOGETHER

This item would go well with:

Price for all 3 Items

$1,349.70